Raspberry Pi - Edu Learning Board-V2 E01 & E03

£45.99

   

 

   

 

 

      Minecraft Pi Traffic light demo -   with EDU-V2-E01 board

   

      Minecraft Pi  &  RFID reader change block demo -   with EDU-V2-E01 board

 

1. EDU-Learing Kit-V2   EDU-V2-E01

-- Module /sensor GPIO Learning Kits  

  ( support Raspberry Pi B2/A+/B+)

 

 

 

1.The EDU Learning Board provide RTC clock with CR1220 3V Backup Battery.

2. provide 2 switch control 2 sets Traffic light , provide python traffic light program.

3. provide RFID Reader socket ( SPI signal) / NRF24L01 socket (SPI signal)

    you can choose use RFID or NRF24L01  ( both use SPI signal)

4. Provide 2 extra i2c device input port, one for 3.3V, one for 5V

5. provide 3.3V power Regulator for 3.3V device ( RFID/ NRF24L01/ESP8266) i2c device

6. provide DS18B20 temperature sensor socket (GPIO4)

7. provide IR Receiver sensor socket (GPIO23)

8. provide IR PIR motion sensor socket (GPIO23)

9  provide 1  5V 28BYJ-48 Step Motor socket (5V can select from Pi or external)

   (GPIO 17,18,27,22) Step Motor

10 provide 1 buzzer  (GPIO24)

11  provide 2 sets traffic light

 first set traffic light   Red (GPIO19), Yellow(GPIO13), Green (GPIO12) ,Switch 1(GPIO20)

 second set traffic light  Red (GPIO16), Yellow(GPIO21), Green (GPIO26) ,Switch 2(GPIO6)

 

Below are the new functions we added in V2 
  • 2 x R,Y,G LED display stand set
  • 2 x Servo motor socket
  • HAT EEPROM 24c32 support on board 
  • 1 x DHT22 Temperature & Humidity sensor socket
  • HY-SRF05 Ultrasonic distance sensor socket
  • 16x2/20x4 character LCD socket
  • 84x48 Pixels Monochrome LCD socket

Advance user   --------   in AT command mode

  • ESP8266 Serial WiFi module socket        Spec  AT command   Datasheet    AT Example
  • Bluetooth 2.0 module socket         AT command  Datasheet
  • Bluetooth 4.0 BLE        AT command  Datasheet

1. Traffic light set                   2. Bluetooth v4.0 0 BLE
3. RGB Light E03 module      4. Bluetooth v2.0

 

 

1. 2 x SG90 Micro Servo        2. RFID Reader
3. NRF24L01 RF Module       4. 5V 28BYJ48 Step Motor

 

     1. Ultrasonic distance sensor                 

 2. DHT22 Temperature & Humidity sensor

    3. 84x48 Pixels Monochrome LCD          

 4. 16x2 character LCD

 

1. 20x4 character LCD  with DS18B20 Temperature sensor

2. PIR motion sensor  with DS18B20 Temperature sensor

 

1. Bluetooth V2.0 serial console to Andriod Tablet
2. ESP8266 Serial WiFi module

 

HAT EEPROM read/write demo

 

NRF24L01 RF module demo -- provide python program send message , need two of  Pi , one use Mes.py one use Recv.py 

 

***   AT command in CuteCom demo for ESP8266WiFi serial module & Bluetooth 2.0/4.0 BLE  (for  EDU-V2-E01 & EDU-V2-E02)

Bluetooth v2.0 HC-05 AT command  in CuteCom

 

Bluetooth v4.0 BLE  HM-10 AT command  in CuteCom

 

ESP8266 WiFi serial module AT command  in CuteCom

 

ESP8266 WiFi serial module AT command example 
** Join Router 
AT+RST
AT+CWMODE=3 
AT+CWLAP     ---- search WiFi Network
AT+CWJAP="your ssid","password"     join your Router Spot
AT+CWJAP=?      ---- check if connected successfully

 

**** Acting as a TCP Client

AT+CIPMUX=1

Specify which connection channel you wish to connect on ( 0 - 4 ), the protocol type (TCP/UDP), the IP address (or domain if you have DNS access) and the port number using the CIPSTART command:

AT+CIPSTART=4,"TCP","google.com",80

You should receive the response OK followed by Linked when the connection is open:

AT+CIPSEND=4,18

This time, instead of an “OK” response your will get a > prompt:

GET / HTTP/1.0

The module should respond with: SEND OK

The module should provide a second response once the web server responds:

+IPD,4,529:

The 4 indicates it’s data from connection channel 4 and the 529 indicates there’s 529 bytes of data. You should now see the data:

HTTP/1.0 302 Found

Cache-Control: private

Content-Type: text/html: .......

 

 

**** Acting as a TCP Server

1. Connect to a WiFi access point.

2. Enable multiple connections. AT+CIPMUX=1

3. Find out the IP address of the module: AT+CIFSR

Note the response, e.g.:  192.168.0.14

4. Set the module to listen (first parameter, mode is set to 1 ) for a connection on a specific port

(in this case port 1336): AT+CIPSERVER=1,1336

5. From another device on the same network connect to the listening port, e.g. with telnet:

use PuTTY login from PC

The module should display: Link

Type some text into the telnet session, e.g.: this is a book

The module should display the following ( 0 being the connection channel, 14 being the length of the data received: +IPD,0,14:this is a book   OK

 

 

use PuTTY Telnet function to login from PC

 

 

different package sensor and modules for EDU boardard

Module set E01-M011
1. PIR motion sensor  2.Mini 5V Fan   3, SRF05 UltraSonic sensor 
4. DS18B20 Temp Sensor  5. DHT22 Temp & Humidity Sensor
6. RYG LED stand set x2 

 

 

Module set E01-M02
 
1. PIR motion sensor   2.Mini 5V Fan    3. SRF05 UltraSonic sensor 
4. RFID Reader Kit   5. NRF24L01 RF module   
6. DHT22 Temp & Humidity Sensor  7. ESP8266 Serial WiFi module 
8. Bluetooth V2.0  module   9. RYG LED stand set x2  
10.DS18B20 Temp Sensor   11. IR received sensor 

 

Module set E01-M03
 
1. PIR motion sensor 2. 5V Step Motor   3. 5V Mini Fan  
4.16x2 character LCD 5. RFID Reader Kit   6.NRF24L01 RF module 
7. SG90 Micro Servo  8. SRF05 UltraSonic sensor  
9. RYG LED stand set x2  10. DHT22 Temp & Humidity Sensor 11.DS18B20 Temp 12. IR Received sensor 
13. ESP8266 Serial WiFi module  14. Bluetooth V2.0  module
15. Bluetooth V4.0 BLE module

 

 

Module set E01-v1-2-v2 
1. 16x2 character LCD  2.SG90 Micro Servo
3. SRF05 UltraSonic sensor   4. DHT22 Temp & Humidity Sensor   
5. RYG LED stand set x2   6. ESP8266 Serial WiFi module 
7. Bluetooth V2.0 module 8. Bluetooth V4.0 BLE module
 
 

2. EDU-Learing Kit-V2 EDU-V2-E03 - RGB Light -Servo Learning Kit                  ( support Raspberry Pi B2/A+/B+/A/B)

  • RGB - White LED Light control 
  • 2 i2c Ports for extra devices   (GND,5V,SDA,SCL) (GND,5V,SDA,SCL)
  • 16 channel PWM servo Port
  • 2p Terminal block VCC input for Servo motor

   

 

 

Command "RGBINIT"  will active RGB function, open a window for "Colour Chooser"

choose the colour code from "Colour Chooser"

 

Download

 

1) Raspberry Pi image with  Pi_Scratch_v276 ready   for Raspberry Pi B2/A+/B+

Download  IMG  Pi_Scratch_276-Pi-2.img - Raspbian Wheezy  2015-05-05   3.81GB

    edu-kit02-v2-26-06-2015.img   01  02  03  04   -  img to 4 zip use 7-zip software  1.34GB      1,2,3 - 378880KB, 4 - 155954KB

 ready to use Pi_Scratch_v276B with  Auto Login & Auto Load Pi_Scratch &  SSH enable -- 

 SSH enable --  user - root   password : pi  for 4GB SD card   use Win32DiskImager

 

 

Demo software Pack   EDU-PacK-v2.tar

or   sudo wget http://pridopia.co.uk/pi-pgm/EDU-Pack-v2.tar

 

User Manual    

  EDU Learning Board -v2 User Manual    v1.0  PDF format   19.51MB

   

 

Package Content

  1x Rs-Pi Edu-v2-E01 &E03 Learning  Board

1x manual 

  

 
 
 

Raspberry Pi

Products  

   

  

              

 Scratch driver for Raspberry Pi  

   Pi_Scratch software

 

 

    ESP8266WiFi Module

 

    Bluetooth console

 

      Win10 IoT Core

 

  

 Flag Counter

 

 

 

 

Copyright ?009
www.pridopia.co.uk
All rights reservedd

Home           About us           Support           Shopping           Contacts            FAQ