Raspberry Pi - IR Receiver 38khz Sensor &  

                       Remote Control Set      




VCC to  3.3V P1 pin1, signal to P1 pin16(GPIO23) , GND to P1 pin6(GND)

38KHz IR Infrared Remote Control with battery 

The new ultra-thin 38K universal infrared remote control, NEC encoding format 1-21-key remote control, USB port stereo, car MP3, foot bath, lighting, digital photo frame, microcontroller development board, learning board, etc..
Size: 86  x 40 x 6.0mm
The remote control range of 8 - 10 m (infrared receiver quality of the middle whether the obstacles and other factors will affect the remote control distance)
Battery: 3V lithium manganese battery
IR carrier frequency: 38KHz
Surface materials: 0.125mmPET


Setting  Detail

  irw  read key when you press the remote control


irexec   read key when you press the remote control


python IRR_v2.py read key


   Support our scratch driver software, can be easy use in scratch

   Scratch driver software






1.broadcast "LIRREMOTEINIT" 

2. after broadcast  Press the key in remote control you want use in Scratch

in Sensing --> Slider ,    you will see the key you press in the list



 Minimum Requirements a Raspberry Pi with Raspbian (wheezy) installed ,  

 Download      Remote control setting file         

 lircd.conf     lircrc    hardware.conf        IRR.py      User Manual


Package Content

  1x Rs-Pi IR receiver Sensor

3x 20cm male to male cable

1x remote control

1x manual 



Raspberry Pi





   IR remote Setting 




   Scratch driver for Raspberry Pi

Pi_Scratch software



Copyright 2021
All rights reserved

Home           About us           Support           Shopping           Contacts            FAQ